Cisco 10GBASE XENPAK Module
Product Details
Manufacturer: Brocade
Part #: Cisco 10GBASE XENPAK
Price: Contact Us
Warranty: 90 Days
- Product Description
- Guarantee
- Shipping and Payment Information
Cisco 10GBASE XENPAK Module
The range of Cisco 10GBASE XENPAK Modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications
Main features of Cisco 10GBASE XENPAK modules include:
- Supports 10GBASE Ethernet
- Hot-swappable input/output device plugs into an Ethernet XENPAK port of a Cisco switch or router to link the port with the network
- Provides flexibility of interface choice
- Supports “pay-as-you-populate” model
- Supports the Cisco quality identification feature that enables a Cisco switch or router to identify whether the module is a Cisco certified and tested XENPAK module
- Interoperable with respective Cisco 10-Gigabit X2, XFP and SFP+ modules on the same link
Cisco offers six modules in this product family:
- Cisco XENPAK-10GB-CX4: Supports link lengths of up to 15m on CX4 cable.
- Cisco XENPAK-10GB-LRM: Supports link lengths 220m on standard FDDI-grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3
The Cisco 10GBASE-LRM Module also supports link lengths of 300m on standard single-mode fiber (SMF, G.652).
- Cisco XENPAK-10GB-SRSupports a link length of 26m on standard FDDI grade MMF. Up to 300m link lengths are possible when using 2000 MHz/km MMF (OM3). Up to 400m link lengths are possible when using 4700 MHz/km MMF (OM4).
- Cisco XENPAK-10GB-LR+: Supports a link length of 10 km on standard single-mode fiber (SMF) (G.652).
- Cisco XENPAK-10GB-ER+: Supports a link length of up to 40 km on SMF (G.652).
- Cisco XENPAK-10GB-ZR: Supports link lengths of up to about 80 km on SMF. This interface is not part of the 10 Gigabyte Ethernet standard but is built according to Cisco optical specifications.
The maximum number of powered devices supported in a system for each class depends on the specific system configuration such as chassis type, supervisor engine, and power supply used.
For quickest response, please complete the buy/sell form at the top of the page.
Since 1982, Spectra
is your global source for used and refurbished Cisco Routers and Switches!
| Part Number | Product Description |
|---|---|
| XENPAK-10GB-CX4 | Cisco 10GBASE-CX4 XENPAK Module for CX4 cable |
| XENPAK-10GB-LRM | Cisco 10GBASE-LRM XENPAK Module for MMF |
| XENPAK-10GB-SR | Cisco 10GBASE-SR XENPAK Module for MMF |
| XENPAK-10GB-LR+ | Cisco 10GBASE-LR XENPAK Module for SMF |
| XENPAK-10GB-ER+ | Cisco 10GBASE-ER XENPAK Module for SMF |
| XENPAK-10GB-ZR | Cisco 10GBASE-ZR XENPAK Module for SMF |
| Specifications | |
| Platform Support | Cisco XENPAK modules are supported on Cisco switches and routers. |
| Connectors | • XENPAK-10GB-CX4: InfiniBand 4x connector • All others: Dual SC/PC connector |
| Dimensions | Dimensions (DxWxH): 4.76″ x 1.42″ x 0.47″ (121 x 36 x 18 mm). Cisco XENPAK modules typically weigh less than 300 g. |
| Environmental Conditions and Power Requirements | • Operating temperature range is between 0 and 40°C (32 to 104°F); storage temperature range is -40 to 75°C (-40 to 167°F).
• Maximum power consumption per Cisco XENPAK module is 8W. |
| Standards | • IEEE 802.3ae (-SR, -LR, -ER)
• IEEE 802.3aq (-LRM) • IEEE 802.3ak (-CX4) • XENPAK MSA: INF-8474i • GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable • GR-326-CORE: Generic Requirements for Single-mode Optical Connectors and Jumper Assemblies • GR-1435-CORE: Generic Requirements for Multi-Fiber Optical Connectors |
| Safety | • Laser Class 1 21CFR-1040 LN#50 7/2001
• Laser Class 1 IEC60825-1 |
Guarantee
All Spectra
provided Cisco Routers and Switches are put through a rigorous refurbishment, reconditioning and testing process.
We guarantee our products to be:
- Original equipment manufactured and serial numbered numbered by Cisco
- Configured to exact user specifications
- Fully refurbished to manufacturers standards of new [ETN]
- All hard drives are 72 hour burn in/Load Tested
- Complete with manufacturers ship group
- Provided with 90 day warranty
- Shipped in a timely manner
Shipping Information and Payment Options
Shipping options:
All of our products are professionally packed and fully insured to avoid any damage in transit.
Spectra offers several shipping options to accommodate every need:
From Ground to Overnite to palletized freight, we have excellent vendors that will handle your shipment in a professional, cost-effective and timely manner.
Payment Options:
Spectra accepts bank wire, ACH, company check, & paypal.
We welcome ALL major credit cards with no surcharge to our customers.