Brocade ICX 6610-24 SAN Switch

Buy or sell a Used Brocade ICX6610-24 SAN Switch. Multiple configurations are available. Please contact us by phone or filling out our quote form for current pricing and availability.

Brocade ICX6610-24

Product Details

Manufacturer: Brocade
Part #: Brocade ICX6610-24
Price: Contact Us
Warranty: 90 Days

Quote This Equipment
Sell One Like This
View Spec Sheet


Brocade ICX 6610-24 SAN Switch

The Brocade ICX6610-24 SAN Switch redefines the economics of enterprise networking by providing unprecedented levels of performance, availability, and flexibility in a stackable form factor—delivering the capabilities of a chassis with the flexibility and cost-effectiveness of a stackable switch.

Non-Stop High Availability
Brocade ICX 6610 Switches help deliver continuous availability to optimize the user experience. Brocade stacking technology delivers high availability, performing real-time state synchronization across the stack and enabling instantaneous hitless failover to a standby controller in the unlikely event of a failure of the master stack controller. Organizations also can use hot-insertion/removal of stack members to avoid interrupting service when adding a switch to increase the capacity of a stack or replacing a switch that needs servicing.

Additional highlights include:

  • Delivers chassis-level performance and availability, providing an optimal user experience for streaming video, Virtual Desktop Infrastructure (VDI), Unified Communications (UC), and other mission-critical campus applications
  • Offers unprecedented stacking performance with 320 Gbps of stacking bandwidth, eliminating the need to work around inter-switch bottlenecks
  • Provides up to 1 Tbps of total switching capacity with up to 384 1 GbE and 64 10 GbE per stack for campus network edge and aggregation layers
  • Provides unmatched availability with four fully redundant 40 Gbps stacking ports per switch, hitless stacking failover, hot switch replacement, and dual hot-swappable power supplies and fan assemblies
  • Simplifies network operations and protects investments with the Brocade HyperEdge Architecture, enabling consolidated network management and advanced services sharing across heterogeneous switches.
  • Offers up to eight “pay-as-you-need” 10 GbE ports activated through software licensing
  • Provides peace of mind with Brocade Assurance Limited Lifetime Warranty

For quickest response, please complete the buy/sell form at the top of the page.

Since 1982, Spectra
is your global source for used and refurbished Brocade switches!

Models
ICX6610-24-F
ICX6610-24-P
24 or 48 RJ-45 Ports 24 SFP Ports 24 or 48 PoE+ Ports
Brocade ICX 6610-24 Brocade ICX 6610-48 Brocade ICX 6610-24F Brocade ICX 6610-24P Brocade ICX 6610-48P
Switching capacity
(data rate, full duplex)
528 Gbps 576 Gbps 528 Gbps 528 Gbps 576 Gbps
Forwarding capacity
(data rate, full duplex)
396 Mpps
(wire speed)
432 Mpps
(wire speed)
396 Mpps
(wire speed)
396 Mpps
(wire speed)
432 Mpps
(wire speed)
Stacking bandwidth
(data rate, full duplex)
320 Gbps 320 Gbps 320 Gbps 320 Gbps 320 Gbps
10/100/1000 Mbps RJ-45 ports 24 48 n/a 24 48
100/1000 Mbps SFP ports n/a n/a 24 n/a n/a
Dual-mode 1/10 GbE SFP/SFP+ ports
(10 GbE SFP+ optional upgrade license)
8 8 8 8 8
40 Gbps QSFP stacking ports 4 4 4 4 4
PoE Power Budget
(two power supplies)
n/a n/a n/a 1500 W 1500 W
Maximum PoE Class 3 ports n/a n/a n/a 24
(one power supply)
48
(one power supply)
Maximum PoE+ ports n/a n/a n/a 24
(one power supply)
48
(two power supplies)
Redundant/load-sharing; hot-swappable power supplies
(second optional)
2×250 W 2×250 W 2×250 W 2×1000 W 2×1000 W
Weight
(one power supply/one fan tray)
6.42 kg
(14.15 lb)
6.78 kg
(14.95 lb)
6.69 kg
(14.75 lb)
7.10 kg
(15.65 lb)
7.46 kg
(16.45 lb)
Dimensions 429 mm (16.880 in.) W x 406.4 mm (16.00 in.) D x 44 mm (1.732 in.) H – 1RU
Airflow Front to back (reversible)
System Architecture
Connector options
  • 10/100/1000 ports: RJ-45
  • 1 Gbps SFP ports: SX, LX, LHA, LHB, 1000Base-BX, CWDM
  • 10 Gbps SFP+ ports: Direct-attached copper (Twinax), SR, LR
  • Stacking ports: 40 GbE QSFP for use with direct-attached 1 meter or 5 meter stacking cable
  • Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45
  • Console management: RJ-45 serial
Maximum MAC addresses
  • 32,000
Maximum VLANs
  • 4096
Maximum STP (spanning trees)
  • 254
Maximum routes (in hardware)
  • 16,000
Trunking
  • Maximum ports per trunk: 8
  • Maximum trunk groups: 124
Maximum jumbo frame size
  • 9000 bytes
Layer 2 switching
  • 802.1s Multiple Spanning Tree
  • 802.1x Authentication
  • Auto MDI/MDIX
  • BPDU Guard, Root Guard
  • Dual-Mode VLANs
  • Dynamic VLAN Assignment
  • Dynamic Voice VLAN Assignment
  • Fast Port Span
  • GARP VLAN Registration Protocol
  • IGMP Snooping (v1/v2/v3)
  • Link Fault Signaling (LFS)
  • MAC Address Locking; Port Security
  • MAC-Layer Filtering
  • MAC Learning Disable
  • MLD Snooping (v1/v2)
  • Multi-device Authentication
  • Per-VLAN Spanning Tree (PVST/PVST+/PVRST)
  • Mirroring – Port-based, ACL-based, MAC Filter-based, and VLAN-based
  • Port Loop Detection
  • Private VLAN
  • Protected Link Groups
  • Protocol VLAN (802.1v), Subnet VLAN
  • Remote Fault Notification (RFN)
  • Single-instance Spanning Tree
  • Single-link LACP
  • Trunk Groups
  • Uni-Directional Link Detection (UDLD)
Base Layer 3 routing
  • IPv4 static routes
  • ECMP
  • Port-based Access Control Lists
  • L3/L4 ACLs
  • Host routes
  • Virtual Interfaces
  • Routed Interfaces
  • Route-only Support
  • Routing Between Directly Connected Subnets
  • HyperEdge service propagation
Premium Layer 3 routing
  • IPv4 and IPv6 static and dynamic routes
  • OSPF v2, OSPF v3 (IPv6)
  • PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4/IPv6 multicast routing functionality)
  • PBR
  • RIP v1/v2, RIPng (IPv6)
  • Virtual Route Redundancy Protocol (VRRP)
  • VRRP-E, VRRP-E (IPv6)
  • VRRPv3 (IPv6)
Advanced Layer 3 routing
  • BGP4, BGP4+(IPv6)
  • GRE
  • IPv6 over IPv4 tunnels
  • VRF (IPv4 and IPv6)
Metro features
  • Metro-Ring Protocol (v1, v2)
  • Virtual Switch Redundancy Protocol (VSRP)
  • VLAN Stacking (Q-in-Q)
  • VRRP
  • Topology Groups
Quality of Service (QoS)
  • ACL Mapping and Marking of ToS/DSCP
  • ACL Mapping and Marking of 802.1p
  • ACL Mapping to Priority Queue
  • ACL Mapping to ToS/DSCP
  • Classifying and Limiting Flows Based on TCP Flags
  • DHCP Relay
  • DiffServ Support
  • Honoring DSCP and 802.1p
  • MAC Address Mapping to Priority Queue
  • Priority Queue Management using Weighted Round Robin (WRR),
    Strict Priority (SP), and a combination of WRR and SP
IEEE standards compliance
  • 802.1AB LLDP/LLDP-MED
  • 802.1D-2004 MAC Bridging
  • 802.1p Mapping to Priority Queue
  • 802.1s Multiple Spanning Tree
  • 802.1w Rapid Spanning Tree
  • 802.1x Port-based Network Access Control
  • 802.3 10 Base-T
  • 802.3ab 1000 Base-T
  • 802.3ad Link Aggregation (Dynamic and Static)
  • 802.3ae 10 Gigabit Ethernet
  • 802.3af Power over Ethernet
  • 802.3at Power over Ethernet Plus
  • 802.3u 100 Base-TX
  • 802.3x Flow Control
  • 802.3z 1000Base-SX/LX
  • 802.3 MAU MIB (RFC 2239)
  • 802.3ba 40Gbps Ethernet
  • 802.1AE – MACsec (HW Capable)
  • 802.3az-2010 – EEE (HW Capable)
Traffic management
  • ACL-based inbound rate limiting and traffic policies
  • Broadcast, multicast, and unknown unicast rate limiting
  • Inbound rate limiting per port
  • Outbound rate limiting per port and per queue
High availability
  • Redundant hot swappable internal power supplies
  • Hot-swappable fan trays
  • L3 VRRP protocol redundancy
  • Real-time state synchronization across the stack
  • Hitless failover from master to standby stack controller
  • Protected link groups
  • Hot insertion and removal of stacked units
Management
Management and control
  • Auto Configuration
  • Brocade HyperEdge technology*
  • Configuration Logging
  • Digital Optical Monitoring
  • Display Log Messages on Multiple Terminals
  • Embedded Web Management
  • Embedded DHCP Server
  • Industry-Standard Command Line Interface (CLI)
  • Key-based activation of optional software features
  • Integration with HP OpenView for Sun Solaris, HP-UX, IBM AIX, and Windows
  • Brocade Network Advisor support
  • MIB Support for MRP, Port Security, MAC Authentication, and MAC-based VLANs
  • Out-of-band Ethernet Management
  • RFC 783 TFTP
  • RFC 854 TELNET Client and Server
  • RFC 951 Bootp
  • RFC 1157 SNMPv1/v2c
  • RFC 1213 MIB-II
  • RFC 1493 Bridge MIB
  • RFC 1516 Repeater MIB
  • RFC 1573 SNMP MIB II
  • RFC 1643 Ethernet Interface MIB
  • RFC 1643 Ethernet MIB
  • RFC 1724 RIP v1/v2 MIB
  • RFC 1757 RMON MIB
  • RFC 2068 Embedded HTTP
  • RFC 2131 DHCP Server and DHCP Relay
  • RFC 2570 SNMPv3 Intro to Framework
  • RFC 2571 Architecture for Describing SNMP Framework
  • RFC 2572 SNMP Message Processing and Dispatching
  • RFC 2573 SNMPv3 Applications
  • RFC 2574 SNMPv3 User-based Security Model
  • RFC 2575 SNMP View-based Access Control Model SNMP
  • RFC 2818 Embedded HTTPS
  • RFC 3176 sFlow
  • SNTP Simple Network Time Protocol
  • Support for Multiple Syslog Servers
Embedded security
  • 802.1X Accounting
  • MAC Authentication
  • Bi-level Access Mode (Standard and EXEC Level)
  • EAP pass-through support
  • IEEE 802.1X username export in sFlow
  • Protection against Denial of Service (DoS) attacks
Secure management
  • Authentication, Authorization, and Accounting (AAA)
  • Advanced Encryption Standard (AES) with SSHv2
  • RADIUS/TACACS/TACACS+
  • Secure Copy (SCP)
  • Secure Shell (SSHv2)
  • Username/Password
  • Web authentication
Environment
Temperature
  • Operating temperature: 0°C to 40°C/32°F to 104°F
  • Storage temperature: −25°C to 70°C/13°F to 158°F
Humidity
  • Relative humidity: 5% to 95%, non-condensing
Altitude
  • Storage altitude: 10,000 ft (3000 m) maximum
Acoustic
  • From 39.6 dB (24 ports, one fan, one power supply) to 48.7 dB (48 ports, two fans, two power supplies)
Power
Power supplies
  • Up to two internal, redundant, field-replaceable, load-sharing AC or DC power supplies with dedicated system and PoE power
Power inlet
  • C13
Input voltage
  • Typical 100 to 240 VAC
Input line frequency
  • 50 to 60 Hz
Power draw (no PoE load)
Model With 1 power supply With 2 power supplies
Brocade ICX 6610-24 120 W 140 W
Brocade ICX 6610-48 165 W 185 W
Brocade ICX 6610-24F 125 W 145 W
Brocade ICX 6610-24P 120 W 140 W
Brocade ICX 6610-48P 165 W 185 W

Guarantee

All Spectra
provided Brocade Switches are put through a rigorous refurbishment, reconditioning and testing process.
We guarantee our products to be:

  • Original equipment manufactured and serial numbered numbered by Brocade
  • Configured to exact user specifications
  • Fully refurbished to manufacturers standards of new [ETN]
  • All hard drives are 72 hour burn in/Load Tested
  • Complete with manufacturers ship group
  • Provided with 90 day warranty
  • Shipped in a timely manner

Shipping Information and Payment Options

Shipping options:

All of our products are professionally packed and fully insured to avoid any damage in transit.

Spectra offers several shipping options to accommodate every need:
From Ground to Overnite to palletized freight, we have excellent vendors that will handle your shipment in a professional, cost-effective and timely manner.

Payment Options:

Spectra accepts bank wire, ACH, company check, & paypal.
We welcome ALL major credit cards with no surcharge to our customers.