The Brocade FCOE10-24 Blade Switch provides a cut-though non-blocking architecture designed for use in Brocade DCX Backbones. It features 24 10 Gbps DCB ports and extends DCB/FCoE capabilities to enable end-of-row DCB/FCoE deployment. In addition, it processes FCoE traffic at wire speed for transport to Fibre Channel and FCoE storage systems. By enabling LAN and SAN access over a single server connection, the Brocade FCOE10-24 simplifies network design, reducing capital and operating expenses.
Additional highlights include:
High-Density, End-Of-Row Connectivity For Server I/O Consolidation
Unified DCB/FCoE Solution To Reduce Costs
Comprehensive Layer 2 LAN Capabilities
Brocade Fabric OS-powered, Non-Disruptive SAN Connectivity
Higher Fabric Security
Seamless, Unified Management
For quickest response, please complete the buy/sell form at the top of the page.
Since 1982, Spectra
is your global source for used and refurbished Brocade switches!
24 ports with 10 Gigabit Ethernet (GbE)
The Brocade FCOE10-24 de-encapsulates FCoE traffic and forwards to chassis-based Brocade DCX Fibre Channel port blades
10 Gbps line speed
Maximum frame size
9048-byte Ethernet frame for DCB ports
Data traffic types
Fabric switches supporting unicast, multicast (255 groups), and broadcast
MAC address table entries
32K MAC addresses
Data Center Bridging eXchange (DCBX) Priority-based Flow Control (PFC): IEEE 802.1Qbb Enhanced Transmission Selection (ETS): IEEE 802.1Qaz
DCB media types
Hot-pluggable, Brocade 10 GbE SFP+ supports any combination of Short-Reach (SR) and Long-Reach (LR) optical transceivers
Data Link Layer (Layer 2) Features
Layer 2 features
Layer 2 hardware forwarding packets 360mpps Layer 2 Virtual Local Area Networks (VLANs) – 4096 VLAN Encapsulation 802.1Q Rapid Spanning Tree Protocol (RSTP) Multiple Spanning Tree MSTP (802.1s) – 16 instances STP PortFast and PortFast Guard STP Root Guard Link Aggregation Control Protocol (LACP) IEEE- 802.3ad Brocade enhanced frame-based trunking Advanced PortChannel hashing based on Layer 2, 3, and 4 information Pause Frames (802.3x) Storm Control (unicast, multicast, and broadcast) Address Resolution Protocol (ARP) RFC 826 Internet Group Management Protocol (IGMP) snooping versions 1, 2, and 3
Layer 2 security
Ingress Access Control Lists (ACLs) Standard and extended Layer 2 ACLs VLAN based ACLs (VACLs) Port-based ACLs (PACLs) Named ACLs ACL statistics Optimized ACL distribution Port-based network Access Control, IEEE 802.1X
Layer 2 Quality of Service (QoS)
Eight priority levels for QoS IEEE 802.1p Class of Service (CoS) 8 hardware queues per port Per-port QoS Configuration CoS trust – IEEE 802.1p Modular QoS CLI (MQC) compliance Per port Virtual Output Queuing CoS based egress queuing Egress Strict Priority Queuing Egress port-based scheduling: Weighted Round-Robin (WRR)
Complete T11 FCoE entity and FCoE bridging. The FCoE hardware engine provides:
Detection of Fibre Channel encapsulation and redirection of FCoE fabric login frames
Encapsulation of Fibre Channel frames in FCoE Ethernet packets (FC > FCoE)
Extraction of Fibre Channel frames from FCoE Ethernet packets (FCoE > FC)
Mapping of Fibre Channel destination Virtual Fabrics and destination FC_ID to Ethernet Virtual LAN and destination MAC addresses
Fabric-Provided MAC Addresses (FPMAs) enable new Ethernet MAC addresses to be created using the FC_ID assigned by the fabric.
FCoE support is enabled on the Brocade FCOE10-24 blade
Brocade Network Advisor:
Brocade Network Advisor uses HTTP/HTTPS and SNMP protocols to communicate with the Brocade DCX/DCX-4S chassis in order to effectively manage and monitor DCB features
Brocade Network Advisor supports the following FCoE/DCB functionality:
Discovery, connectivity map, and product list
Industry common Command Line Interface (CLI) Security Shell (SSH) v2 Authentication, Authorization, and Accounting (AAA) Simple Network Management Protocol (SNMP) v1, v2, and v3 Unified username and passwords across CLI and SNMP Syslog, Microsoft Challenge Handshake Authentication Protocol (CHAP) Remote Monitoring (RMON) Per-port ingress and egress counters Role-Based Access Control (RBAC) Power On Self Test (POST) Comprehensive bootup diagnostics
Power-On Self-Test (POST): These tests are port blade-oriented to ensure that the switch is ready for use; testing is performed on physical ports. Switch-level testing is executed at the user port level. The tests rely on the standard Fabric OS support to provide routing and port setup. Manufacturing support includes long-duration testing.
Width: 27.9 cm (11.0 in) Height: 41.2 cm (16.2 in) Thickness: 3.6 cm (1.4 in)
Operating: 0°C to 40°C (32°F to 104°F) Non-operating: -25°C to 70°C (-13°F to 158°F)
Operating: 10% to 85% non-condensing at 40° C (104°F) Non-operating: 10% to 93% at 70° C (158°F)
Operating: Up to 3000 meters (9,842 feet) Storage: Up to 12 kilometers (39,370 feet)
Operating: 0.5 g p-p, 5 to 500 to 5 Hz Non-operating:2.0 g p-p, 5 to 500 to 5 Hz
Maximum: 250 watts
40 to 50 VAC nominal
Input line frequency
47 to 63 Hz
60 amps maximum
29 amps at 12V DC
provided Brocade Switches are put through a rigorous refurbishment, reconditioning and testing process.
We guarantee our products to be:
Original equipment manufactured and serial numbered numbered by Brocade
Configured to exact user specifications
Fully refurbished to manufacturers standards of new [ETN]
All hard drives are 72 hour burn in/Load Tested
Complete with manufacturers ship group
Provided with 90 day warranty
Shipped in a timely manner
Shipping Information and Payment Options
All of our products are professionally packed and fully insured to avoid any damage in transit.
Spectra offers several shipping options to accommodate every need:
From Ground to Overnite to palletized freight, we have excellent vendors that will handle your shipment in a professional, cost-effective and timely manner.
Spectra accepts bank wire, ACH, company check, & paypal.
We welcome ALL major credit cards with no surcharge to our customers.